Composite Video Considerations - Garmin GPSMAP 8X10 Installation Instructions Manual

Connections
From
HDMI source's HDMI OUT port Chartplotter's HDMI IN port
Chartplotter's HDMI OUT port
Chartplotter's USB port

Composite Video Considerations

This chartplotter allows video input from composite video sources using the port labeled CVBS IN. When
connecting composite video, you should observe these considerations.
• The CVBS IN port uses a BNC connector. You can use a BNC to RCA adapter to connect a composite-video
source with RCA connectors to the CVBS IN port.
• Video is shared across the Garmin Marine Network, but it is not shared across the NMEA 2000 network.
To
Monitor's HDMI IN port
HDMI source's USB port
Cable
Garmin HDMI Cable
Garmin HDMI Cable
GPSMAP USB OTG adapter cable to power the
HDMI source, if possible (2.5 W maximum)
15