Telnet Login; Commands; First Level Commands - Planet WGSW-2840 User Manual

3.4 Telnet login

The switch also supports telnet for remote management. The switch asks for user name and password
for remote login when using telnet, please use "admin" for username and "admin" for password.

3.5 Commands

There are two levels for console commands. The first level provides commands to show system
informations and current configurations. The second level (privileged mode) provides commands to set,
clear and show the configuration.

3.5.1 First level commands

The follow table lists the first commands and the equivalent usages.
Command
enable
show channel
show console-info
show igmp-snooping
show ip http server
show ip telnet server
show mirror
show multicast router
show port counter
show port rate-shaping
show port spantree
show port state
show port storm-limit
show qos map cos-queue-map
show qos map dot1p-cos-map
show qos map mac-cos-map
show qos map port-cos-map
show qos map vlan-cos-map
show qos queue egress-policy
show security MAC-aging
show security filter-MAC
Description
Enable privileged mode
Show channel information
Show console-info
Show igmp snooping information
Show http server information
Show telnet server information
Show mirror information
Show multicast router port information
Show port counter information
Show port ingress and egress rate-shaping
Show spantree information on ports
Show port infomation
Show port storm limit mode and rate
Show qos map cos-queue-map
Show qos map cos-queue-map
Show qos map mac-cos-map
Show each port's cos
Show qos map vlan-cos-map
Show qos queue egress-policy
Show MAC aging time
Show MAC filter entry