Table of Contents
Advertisement
Use MAC Address
Security Setting
Country Region Code
Beacon (ms)
Idle Time
No forwarding among wireless
clients
Hide SSID
Allow BW 40MHz
Click this button to use the MAC address of the wireless card as
SSID. A prefix of 'AP' will be added.
Set the security options (wireless data encryption).
Available options are 0-7, which will affect the available wireless
channels you can use:
0: FCC (US, Canada, and other countries uses FCC radio
communication standards)
1: ETSI (Europe)
2: SPAIN
3: FRANCE
4: MKK
5: MKKI (TELEC)
6: ISERAL (Channel 3 to 9)
7: ISERAL (Channel 5 to 13)
The operating frequency channel will be restricted to the country /
region user located before importing
You can define the time interval that a beacon signal should be
send. Default value is 100. Do not modify this value unless you
know what will be affected
Select the idle time of your wireless network card. Default value is
300. Do not modify this value unless you know what will be
affected
Check this box and wireless clients will not be able to share data
with each other.
Check this box and the SSID will not be broadcasted to the public.
Your wireless clients must know the exact SSID to be able to
connect to your computer.
This option is useful to enhance security level.
Check this box to allow BW 40MHz capability.
Advertisement
Table of Contents
