Table of Contents
Advertisement
only activate a profile a time, and the profile which is activated currently will have a green
check (
) before its name. If the wireless access point is not reachable, a red check (
will be displayed before its name.
If you want to change the connection parameters of a specific profile, just select it and click
'Edit' button, you'll be prompted to input the connection parameters, just like you're creating a
new profile.
If you no longer need a profile, select the profile then click 'Delete'.
3-1-2 Using 802.1x - Certification
After you click '802.1x Setting', a new window will appear:
Parameter
Authentication Type
Description
The EAP authentication protocols this card has supported are included as
follows. This setting has to be consistent with the wireless APs or Routers
that the card intends to connect.
)
Advertisement
Table of Contents
