Table of Contents
Advertisement
Parameter
Available Networks
Rescan Button
Connect Button
Add to Profile Button
1. If the access point you selected does not enable encryption (The content of 'Encryption' field
of the access point you selected is 'None', you'll be connected to this wireless access point
within one minute.
2. If the access point you selected enables encryption, please proceed to next step.
3. If the wireless access point does not have SSID, you'll be prompted to input it here. Please
ask the administrator of this AP and input the exact SSID here, then click 'OK' when ready. If
the SSID you provided here is wrong, you'll not be able to connect to this access point.
If the wireless access point you selected have SSID, please skip this step.
4. If the AP uses encryption, you have to input WEP passphrase or WPA preshared key.
Please ask the administrator, and input the correct passphrase / preshared key here, then click
'OK'. If the value you inputted here is wrong, you will not be able to connect to this wireless
Description
This list shows all available wireless networks within range of your
card. It also displays the information of the networks including the
SSID, BSSID, Signal Strength, Channel, Encryption,
Authentication and Network Type. If you want to connect to any
networks on the list, double-click the item on the list, and the card
will automatically connect to the selected network.
Click "Rescan" button to collect the new information of all the
wireless networks nearby.
Click "Connect" to connect to the selected network.
Add the selected network to Profiles list.
Advertisement
Table of Contents
