Table of Contents
Advertisement
Parameter
Profile Name
SSID
PSM (Power Saving Mode)
Network Type
Description
Define a recognizable profile name for you to identify the different
networks.
The SSID (up to 32 printable ASCII characters) is the unique name
identified in a WLAN. The ID prevents the unintentional merging of two
co-located WLANs.
You may specify a SSID for the card and then only the device with the
same SSID can interconnect to the card. If you want to add the network
nearby to the profile list, pull down the menu, all the networks will be
listed for you to add one of them to the profile list.
The power saving function is only available when the network type is in
Infrastructure.
CAM (Constantly Awake Mode) – The card will always set in active
mode.
PSM (Power Saving Mode) – Enable the card in the power saving mode
when it is idle.
Infrastructure – This operation mode requires the presence of an
802.11 Access Point. All communication is done via the Access Point or
Router.
Ad-Hoc – Select this mode if you want to connect to another wireless
Advertisement
Table of Contents
