Deleting An Activity; About Rf Settings - Philips SJM3152/17 User Manual

• Select the delay you want to add.
Press . See instructions at the end of
OK
this procedure, "To select the delay you
want".
Keep in mind that an activity contains a
maximum of 25 steps.
When you have added all key presses and delays,
select "No". Press . The activity is installed on
OK
your universal remote for iPod™.
4. To return to the Set-up menu, select "Exit".
Press .
OK
To select the delay you want:
1. Use the cursor keys to scroll through the
list of possible delays.
2. Press on desired delay. You'll see
OK
confirmation screen.
3. Press to add another key or delay.
YES
Press to exit activity set-up.
NO
E
Tip
Start up the activity by pressing the Mode key
repeatedly until the activity name appears in
the header of the universal remote for iPod™
display screen. Press
OK
Use more of your universal remote and docking cradle for iPod
.

5.6 Deleting an activity

To delete an activity from your remote control:
1. Select the option "Delete an Activity" in
the Set-up menu by using the cursor keys
Press .
OK
2. Select the activity you want to delete.
Press .
OK
3. Confirm you want to delete the activity
by selecting "Yes". Press
deleted and becomes available again in the
list of activities you can add.
4. To return to the Set-up menu, select "Exit"
and press .
OK

5.7 About RF settings

Show details:
You can check the status of the connection
between the docking cradle and remote:
1. Select the option "RF Settings" in the Set-
up menu by using the cursor keys. Press
OK.
2. Select "Show details." Press
of the connected docking cradle and the
strength of the signal appear.
3. To return to the Set-up menu, select
"Next". Press
OK.
D
Note
When the details of the RF Settings show "No
Connection", the remote is unable to connect to
the docking cradle. If this occurs, you must
reconnect to the dock.
Reconnect to dock
When you want to use your universal remote
for iPod™ with another docking cradle, or in
case of technical problems, you will have to pair
the remote to the docking cradle again.
1. Press and release reconnect button at the
bottom of the iPod™ docking cradle
. The activity is
OK
The name
OK
19