DirecTV, Comcast, AT&T, Verizon, Time Warner, Scientific Atlanta, Tivo and many more. Simply follow the instructions in chapter 2.2 to set up the remote control for your devices. To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
S etting up the universal remote control The example below instructs you how to set up your universal remote control for your TV. You can repeat the same steps for other devices (DVD player/recorder and Cable/Satellite box) which you want to operate, using the SRP2003.
Switch ON the TV. Try out the buttons you need for operating it. Try, for example, if the - CH + and digit buttons function properly. If a button does not work as expected, press • and hold that button. Release it immediately as soon as it works.
Press and hold the button that does not function and immediately release it when the device responds. • If the button still does not function as expected, try pressing it again for a longer period of time. Press the device selection button twice to save your settings and exit setup mode.
... digit buttons for direct channel / track selection..switches the selected device on / off. Note For some TV brands / types, this button will only turn off the TV. You will have to press a digit button (direct channel selection) to turn on the TV again.
Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the...