Wahl 1887 Operating Manual page 12

E N G L I S H
Technical data
Hand-held appliance
Type
Blade system
Blade set width
Cutting length
de Drive
en
Operating voltage
fr
Operation mode
Battery operating time
it
Battery charging time
Dimensions (L x W x H)
es
Weight
Emission sound pressure level
pt
Vibration
nl
Charging stand
Dimensions with accessories
da
(L x W x H):
sv Weight:
Switch mode power supply
no
Manufacturer:
fi
tr
Type:
pl
Input voltage:
cs
Input AC frequency:
Output voltage:
sk
Output current:
Output power:
hr
Average active efficiency:
No-load
hu
power consumption:
sl
Manufacturer:
ro
bg
Type:
ru
Input voltage:
uk
Input AC frequency:
Output voltage:
et
Output current:
Output power:
lv
Average active efficiency:
lt No-load power consumption:
el
12
ar
Professional cord/cordless
hair clipper
Blade set quick-change system
with read-off cutting length
46 mm
0.5 - 2 mm
Brushless DC motor,
approx. 7200 rpm
100 – 240 V AC / 50/60 Hz via switch
mode power supply
Mains / battery (two-way), lithium-ion
up to 120 minutes
approx. 70 minutes
149 x 47 x 48 mm
approx. 210 g
max. 63 dB(A) @ 25cm
< 2.5 m/s2
95 x 75 x 60 mm
80 g
Ten Pao Industrial Co., Ltd.
Room 10-11,6/F., Kwong Sang Hong
Centre, 151-153 Hoi Bun Road, Kwun
Tong, Kowloon, Hong Kong
Adapter 6000
Euro plug
100-240 V
50-60 Hz
5.9 V
1.5 A
8.85 W
78.9%
0.04 W
GOLD MARK (CHINA) HOLDINGS LTD
Unit 1706,17/F.,Vanta Industrial Centre,
21-33 Tai Lin Pai Road,Kwai Chung,
N.T., Hong Kong
Adapter 6000A (VI)
Euro plug / UK plug
100-240 V
50-60 Hz
5.9 V
1.5 A
8.85 W
79.7%
0.04 W
Operating conditions
Ambient temperature: 0°C – +40°C
The appliance is safety insulated and radio screened. It meets the
requirements of EU Electromagnetic Compatibility Directive 2014/30/EU
and Machinery Directive 2006/42/EC.
Operation
Preparation
Keep the packaging material for safe storage or transport
later.
f Check that the contents are complete.
f Check all the parts for possible transport damage.
f In case of transport damage, contact your dealer.
Safety
Caution! Damage due to incorrect power supply.
f Only operate the appliance with the voltage stated on
the nameplate or on the switch mode power supply.
f Only operate the appliance with the switch mode power
supply provided.
Charging the battery
1. Switch the appliance off using the on/off switch (Fig. 2a).
2. Connect the appliance plug on the switch mode power supply to
the charging stand socket (Fig. 4b - 1).
·
The appliance can also be connected directly to the
switch mode power supply for charging (Fig. 4a - 1).
·
Battery overcharging is prevented thanks to intelligent
charge management.
·
The ideal ambient temperature for charging is between
15 °C and 35 °C.
·
Do not expose the appliance to temperatures over 50 °C
for longer periods.
3. Connect the switch mode power supplyto the mains socket (Fig. 4b - 2).
4. Place the appliance in the charging stand (Fig. 4b - 3).
 Charging begins.
or
1. Switch the appliance off using the on/off switch (Fig. 2a).
2. Connect the appliance directly to the appliance plug on the switch
mode power supply (Fig. 4a - 1).
3. Connect the switch mode power supply to the mains socket
(Fig. 4b - 2).
 Charging begins.
·
During charging the battery charge status indicator (C)
blinks green
slowly. With a fully charged battery, the
battery charge status indicator is constantly green.
·
After the appliance has been removed from the charging
stand, the display goes out after approx. 20 seconds
(power saving mode).
1887-1070 00 - 07-2021