Viewing Projector Temperature Graphs - Epson vs 230 Operation Manual

Viewing Projector Temperature Graphs

Downloaded from ManualsNet.com search engine
Note:
• To change the displayed item or order in the Detail list view and Error list, change the Display List
setting on the Environment setup screen.
• To enable or disable monitoring, right-click the projector to select Monitoring enabled or Monitoring
disabled in the Epson Projector Management main screen.
• To monitor projectors even when they are in standby mode (when power is off), select
Communication On as the Standby Mode setting in the projector's menu. Also select the correct
Port setting, if necessary.
Viewing Projector Temperature Graphs
Parent topic: Monitoring and Controlling the Projectors
You can view temperature information of projectors graphically.
Right-click the projector in the Detail list view and select Temperature history.
The background color indicates the temperature status.
• Blue: Requires immediate attention.
• Yellow: Warning status
• Red: Error status
You can switch the temperature unit between Celsius and Fahrenheit, zoom into or out of the graph, and
save the temperature history in a CSV format file.
You can pan around the graph by holding down the right mouse button at any point on the graph and
moving the mouse right or left.
Note:
• You can view the temperature information for a maximum of 30 days.
• Temperature information is obtained only while the Epson Projector Management software is running.
• The indicated value in the graph may not match the actual temperature. Use the value as a guide. See
your projector User's Guide for details on the projector's operating temperature.
• You can view graphs for up to 4 projectors at a time.
• This function is available only for supported models.
23