Table of Contents
Advertisement
Available languages
Available languages
A) DC-POWER TERMINAL (13.8 V / 27.6 V)
B) ANTENNA CONNECTOR (SO-239)
C) EXTERNAL SPEAKER JACK (8 Ω, Ø 3.5 mm)
D) PA SPEAKER JACK (8 Ω, Ø 3.5 mm)
E) OPTIONAL VOX MIKE (Ø 2.5 mm)
C) FUNCTIONS TURNING ON THE UNIT
5 more functions are available. Turn off the unit. Turn on the radio
while pressing one or two keys to set the function.
1) ROGER BEEP
(s key on the unit or UP knob on microphone)
The ROGER BEEP sounds when the PTT switch (11) of the microphone
is released in order to let your correspondent speak. Historically as
CB is a "simplex" communication mode, it is not possible to speak
and listen at the same time (as it is the case with a telephone).
Once the conversation was over, he said "Roger" in order to
prevent his correspondent that it was his turn to talk. The word
"Roger" has been replaced by a significant beep. That is where
the name "Roger beep" comes from.
-
Turn on the power while pressing the s key (3a) or UP knob (12)
to alternate between enable (On) or disable (OF) the ROGER BEEP
function.
-
When function is activated, " " appears on the display.
Note: The Roger beep also sounds in the loudspeaker if the KEY
BEEP function is active. If the KEY BEEP function is not active, only
the correspondent can hear the ROGER BEEP.
In PA mode the function is not allowed.
2) KEY BEEP
(t key on the unit or DN knob on microphone)
Some operations such as changing channels, pressure on keys etc.
are confirmed by a beep tone. This beep tone can be activated
or deactivated as follows:
-
Turn on the power while pressing the t key (3b) or the DN knob
(12) to alternate between enable (On) or disable (OF) the KEY BEEP
function.
-
When function is activated, "BP" appears on the display.
3) F - MICROPHONE TYPE
Your THOMAS FCC AM/FM allows you to use a dynamic or electret
microphone. To select the type:
-
Turn on the power while pressing the F (5) key. The symbol of the
current microphone type dY
displayed. Repeat this action to set the correct microphone type.
Original 6 pins PRESIDENT microphone is electret type.
4) COLOR
(MODE + EMG keys)
-
Turn on the power while pressing the MODE (6) and EMG (7) keys.
The symbol of the current color, among the seven, blinks:
ange),
(green),
(blue),
(cyan light).
-
Use the s/t keys (3) on the unit or UP/DN knobs (12) on the mi-
crophone to change the color.
-
When the color is set, long press the F key (5). A beep sounds, the
characters of the color are displayed during 1 second.
5) RESET
-
Turn on the power while pressing the EMG key (7) to reset to the
factory settings.
-
"rS" blinks in the display.
-
Press the F key (5) for 1 second to confirm.
D) FUNCTIONS WITH PTT SWITCH
4 more functions are available. To activate the function press and
hold the PTT switch (11) and press the function key. Repeat this
process to deactivate the function.
1) TALKBACK
(PTT + F)
11
(F key)
(dynamic) or EL
(electret) is
na
eC
(cyan),
(yellow),
(purple) or
(or-
Advertisement
Table of Contents
