Table of Contents
Advertisement
Available languages
Available languages
See the § VOX SET page 45.
D) FUNCTIONS TURNING ON THE UNIT
2 additional functions are available. FREQUENCY BAND
SELECTION, F key (5) and the MENU mode, AM/FM key
(7).
To activate a function, first turn off the unit. Then turn on
the radio while pressing the corresponding key F (5) or
AM/FM (7).
1) F -
FREQUENCY BAND SELECTION
(Configuration: EU; PL; d; EC; U; In)
The frequency bands have to be chosen according to the
country of use. Don't use any other configuration. Some
countries have usage restrictions. See table page 75.
1. Turn on the power while pressing the F key (5). The letter
corresponding to the current configuration is blinking.
2. In order to
change
the configuration, use the s/t keys
(3) on the unit or the UP/DN key (3) on the microphone.
3. When the configuration is selected, press the F key (5) 1
second. The letter corresponding to the configuration is
continuously displayed and a confirmation beep sounds.
4. At this point, confirm the selection by
switching
transceiver and then
See the frequency bands table at pages 71 to 73 /
configuration table page 74.
2) MENU MODE
(AM/FM key)
The order of the 8 menu,
,
,
manual. However, the menu displayed by entering the
(F key)
switching off
on
it
again.
,
,
,
and
is as described in this
MENU will be the last menu modified by user.
The procedure is the same whatever the function is.
1. Turn off the unit.
2. Turn on the radio while pressing the AM/FM key (7).
displayed.
3. Use s/t key (3) on the unit or UP/DN buttons on the
microphone (3) to
4. Press the AM/FM key (7) to
If the function have more than 1 parameter press the
AM/FM (7) key to
5. Use s/t key (3) on the unit or UP/DN key (3) on the
microphone to
6. Press the AM/FM key (7) to
menu or press the PTT switch (11) to
menu.
7. The unit automatically
disappears on the display.
E) MENU
1) COLOR
1. Turn off the unit.
2. Turn on the radio while pressing the AM/FM key (7).
the
displayed.
3. Use s/t key (3) on the unit or UP/DN buttons on the
microphone (3) to
4. Press then AM/FM key (7) to validate. The current color
symbol is displayed:
(cyan),
(yellow),
,
5. Use s/t (3) on the unit or UP/DN (3) on the microphone
to
change
the color.
47
select
the menu.
validate
the selected menu.
select
the next parameter...
change
the value of the parameter.
confirm
select
and
confirm
exits
the menu after 10 seconds.
select
the
menu.
(Orange),
(green),
(purple),
(cyan light).
is
another
exit
and
is
(blue),
Advertisement
Table of Contents
