Table of Contents
Advertisement
Drive lock-out
A drive lock out is a state that prevents the mobility device
from being driven. When the mobility device is in a drive
inhibit state, the drive wheel LED and the corresponding
seating function LEDs flash on and off.
This sequence continues for the duration of the drive
lock-out.
To end the lock-out, move mobility device back into
safe position.
Actuator lock-out
An actuator lock out is a state that prevents seating motions.
When the mobility device is in an actuator lock-out state,
the seating function LEDs flash for a minimum of three
flashes, unless interrupted.
The sequence continues for the duration of the actuator
lock-out.
To end the lock-out, move mobility device back into
safe position.
1608055-C
4.6.8 Blocked function indication
A blocked function indication is displayed if the user tries
to change a function while operating in another function. A
change of function is by default not permitted.
The blocked function indication differs depending on what
caused the block.
To avoid blocked function indications wait until one
function is completed, before selecting the next
function.
Blocked drive function
If a drive function causes the block:
•
the drive wheel indicator flashes quickly three times;
•
the seating indicator switches off while the drive wheel
indicator flashes.
Wait until one function is completed, before selecting
next function.
Blocked seating function
If a seating function causes the block:
•
the seating indicator flashes quickly three times;
Usage
21
Advertisement
Table of Contents
