5/20/2018
6.3
Starter Rope/Starter Grip (ElastoStart)
- Remove fan housing with rewind
starter
- see 6.2.
Starter rope
- Remove rope rotor - see
"Standard Repairs, Trouble-
shooting" handbook.
- Remove the starter rope from
the rotor.
•
Pry cap out of starter grip.
- Pull rope out of starter grip.
- On FR 350/450, slip tube
(75 mm/2.95") over the starter
rope.
Thread end of new starter rope
•
through the underside of the star-
ter grip.
- Secure end of rope with a simple
overhand knot.
32
http://slidepdf.com/reader/full/stihl-fs-350-service-manualpdf
STIHL FS 350 Service manual.pdf - slidepdf.com
Pull the rope back to locate the
•
knot in the starter grip.
- Push cap into starter grip.
- Secure starter rope to rope rotor.
- Install the rope rotor.
Starter grip
The starter grip is supplied with
starter rope.
- Remove the rope rotor - see
"Standard Repairs, Trouble-
shooting" handbook.
- Pull the knot out of the recess in
A
the rope rotor.
V
5
9
0
A
- Undo the knot and pull the rope
R
2
6
3
out of the rotor and fan housing.
- On FR 350/450, slip tube
(75 mm/2.95") over the starter
rope.
A
V
6
9
0
A
R
2
6
3
Thread the starter rope
•
0000 195 8200 through the gui-
de bush from outside the
fan housing.
A
V
7
9
0
A
R
2
6
3
Thread rope through the hole in
•
the side of the rotor.
- Secure the starter rope with a
simple overhand knot.
•
Pull the rope back into thr rotor
so that the knot locates in the
recess.
- Install the rope rotor - see
"Standard Repairs, Trouble-
shooting" handbook.
- Tension the rewind spring -
6.2.2.
- Fit fan housing with rewind
starter
- see 6.2.2.
A
V
6
2
1
A
R
0
5
2
FS 120, 200, 300, 350, 400, 450, FR 350, 450
A
V
7
2
1
A
R
0
5
2
A
V
8
2
1
A
R
0
5
2
see
33/63