5/20/2018
Pull throttle trigger (1) with
•
throttle cable (2) off the peg.
•
Disconnect throttle cable from
trigger.
Lift contact spring (1) a little and
•
remove the throttle cable (2).
FS 120, 200, 300, 350, 400, 450, FR 350, 450
http://slidepdf.com/reader/full/stihl-fs-350-service-manualpdf
STIHL FS 350 Service manual.pdf - slidepdf.com
Pull interlock lever with contact
•
spring off the peg.
•
Remove contact spring from
interlock lever.
Assemble in the reverse
sequence.
Check positions of throttle cable
•
(1), contact spring (2), protective
tube (3) and insulator (4).
- Tighten screws to 1.0 Nm
(0.75 lbf.ft).
7.4
Slide Control
(Loop Handle)
- Remove the interlock lever
7.3.
Pull slide control off the handle
•
molding.
•
Remove screws from clamps.
- Take handle molding off the dri-
ve tube.
Remove torsion spring from peg.
•
36/63
- see
35