Lubricating The Gearbox; Replacing Starter Rope And Rewind Spring - Stihl BT 120 C Instruction Manual

Lubricating the Gearbox

1
Check grease level after about every 50
hours of operation:
:
Unscrew the filler plug (1). If no
grease can be seen on the inside of
the filler plug, refill the gearbox.
BT 120 C
2
: Apply the tube (2) of STIHL gear
lubricant to the filler hole.
: Squeeze 1/4 oz (5-10 g) grease into
the gearbox.
Do not not over-fill the gearbox.
:
Refit the filler plug and tighten it
down firmly.
English / USA
Replacing Starter Rope
and Rewind Spring
1
1 1
2
3
4
Replacing a Broken Starter Rope
The rewind spring may pop out and
uncoil during this operation. Take
care to avoid injury.
:
Remove the screws (1).
: Lift away the fan housing.
: Remove the spring clip (2).
:
Carefully remove the rope rotor with
washer (3) and pawl (4).
1
23