Panasonic KX-HTS Series Manual page 90

TEMPLATE FOR WALL MOUNTING
1.Copy or print this template and place it on the wall.
2.Install the screws as marked.
If you mount the main unit on a concrete or
mortar wall, fit anchor plugs(not included)
into the wall beforehand.
3.Hook the unit onto the screw heads.
Note
・Make sure to set the print size to correspond
with the size of this page.
・ If the dimensions of the paper output still deviate
slightly from the measurements indicated here,
use the measurements indicated here.
Install a screw here.
225 mm (8.86 in)
Install a screw here.