Panasonic KX-HTS Series Manual page 18

2.1.4 Typical Network Setting Example
2.1.4 Typical Network Setting Example
An example of typical network connection is shown below.
(1) When installing in an office that already has a network infrastructure.
Note
- Dynamic Host Configuration Protocol (DHCP) Server
Description
The PBX has a built-in DHCP server. When the DHCP server is enabled, the PBX will automatically
assign IP addresses to other devices on the network.
Using a DHCP server simplifies network management by removing the need to assign
IP addresses to devices manually.
Notice
• If an external DHCP server is in use, the DHCP Server feature of the PBX must be disabled.
For details about DHCP server settings, refer to
in the Programming Item List.
"Network Configuration-[4-2]LAN Settings-◆DHCP Mode