Table of Contents
Advertisement
Symptoms
[
] blinks in the viewfinder.
[
] blinks on the LCD
panel.
Causes
The subject is too close or difficult to
autofocus.
The camera may be defective.
Remedies
Use the focus-lock technique or
focus manually using the matte
field.
• Press the mid-roll wind-up button
to wind the film, then consult your
Pentax distributor or authorized
Pentax repair shop.
• [
] indication stays on and bat-
tery warning [
] blinks even
if the mid-roll wind-up button is
pressed. In this situation, replace
the battery and press the mid-roll
wind button again.
87
Reference
P.62, P.63
Advertisement
Table of Contents
