UNLOADING THE FILM IN MID-ROLL
26
1
If you wish to remove the film before exposing all
the frames, use this function.
1. Set the main switch to [ ON ].
2. Press the mid-roll wind-up button fully with a
fine-pointed object. The film will wind com-
pletely.
3. Before detaching the film holder, check that
[
] is displayed on the LCD panel.
2
3
4. While firmly holding the wound film roll, affix
the paper seal securely on the back of the
paper leader to prevent from accidental
unwinding of the exposed roll.
• The number of exposed frames on the LCD panel
disappears from the LCD panel.
• When removing the film from the camera, protect
it from exposure to direct sun light.
4