Pentax 645N2 Operating Manual page 68

Pentax film camera operating manual 645n2
Table of Contents

Advertisement

66
1
To set
1. Set the exposure compensation dial to [ D ]. [ D ] will be displayed on the LCD panel.
2. Press up/down button repeatedly until [ on ] appears on the LCD panel.
If [
] is displayed on the LCD panel, the exposure data will be imprinted on the negative.
D
• With a 645 A- lens attached, the exposure data but not the focal length of the lens will be imprinted even
if [
] is displayed on the LCD panel.
D
• With an accessory without the lens information contacts such as a helicoid extension tube attached, the
exposure data but not the focal length and aperture setting of the lens will be imprinted even if [
played on the LCD panel.
• Since the exposure data are imprinted on the outside of picture frame, the data will not be seen on the
actual photographs.
• The shutter cannot be released with the exposure compensation dial set at [ D ].
2
] is dis-
D

Advertisement

Table of Contents
loading

This manual is also suitable for:

645nii

Table of Contents