Setting Pentax Function - Pentax 645N2 Operating Manual

SETTING PENTAX FUNCTION

78
[PF 0] Imprinting the character (capital letters A – G)
If the imprinting is enabled, a capital letter can be
imprinted on the negative.
If the user has more than two cameras a different let-
ter can be set to identify the negatives from each cam-
era.
Pentax Function No. 0
[PF 1] Setting the shutter speed step
For use with the Shutter-Priority AE or Metered
Manual Mode set, the shutter speed step can be set to
either 0.5 or 1 EV steps.
Pentax Function No. 1
1/2EV step (initial setting)
1.0EV step (follows the shutter speed dial)
[PF 2] Setting the metering timer
The metering will stay on for 10 seconds but can be
changed to 20 or 30 seconds.
Pentax Function No. 2
10 seconds (initial setting)
20 seconds
30 seconds
[PF 3] Setting the auto bracketing sequence
You can set the sequence of the auto bracketing expo-
sures.
Pentax Function No.3
Proper exposure
Under exposure
Over exposure
Under exposure
Proper exposure
Over exposure
Over exposure
Proper exposure
Under exposure