Table of Contents
Advertisement
82
[ PF 9 ] Changing the number of frames taken
Changes the maximum frames can be taken when 120 film or 220 film is loaded.
Pentax Function No.9
The maximum frames can be taken is changed depending on the type of film holder is attached.
LCD panel indication
With 120 film back attached
• With 16 or 33 frames set, the film flatness of 2nd frame may be deteriorated in the consecutive-frame
mode.
• The number of frame taken can be changed before 1st frame is taken. After 1st frame is taken, the num-
ber of frames cannot be changed until the film is removed.
With 220 film attached
Setting contents
15 or 32 frames (initial setting)
With 120 film holder ... 15 frames
With 220 film holder ... 32 frames
16 or 33 frames
With 120 film holder ... 16 frames
With 220 film holder ... 33 frames
Advertisement
Table of Contents
