Pentax 645N2 Operating Manual page 82

80
[PF 6] Enabling/disabling the program line for shift-
ing.
The program line of Programmed AE Mode can be
shifted according to your shooting preferences.
Pentax Function No.6
Disabling the programmed
line shift (initial setting)
Enabling the programmed line shift
With the programmed line shift is enabled
The programmed line is shifted 0.5EV step each time the
up/down button is depressed.
Holding the button will shift the program line continuously.
• The shutter speed increases and the aperture opens up
by depressing the up button. Conversely, the shutter
speed decreases and the aperture closes down by
depressing the down button.
• The shifted shutter speed and aperture values are dis-
played in the viewfinder.
• To cancel the program shift, set the main switch to OFF
or change the exposure mode.
[PF 7] Setting the frame counter indication
The frame counter can be set to a count-up indication
or to a count-down indication.
Pentax Function No.7
Count-up indication
(initial setting)
Count-down indication