Alert Message; Troubleshooting Checklist - Pantech AT&T P2030 User Manual

Alert message

If you experience any problem
while using your mobile phone,
please refer to the following
checklist. If the problem still
persists, contact your dealer or
nearest carrier.
When the "Insert SIM Card"
message appears:
Make sure the SIM card is
correctly installed. Check to see if
the SIM card is working properly.
If it does not work, try to clean the
contact points of the card with a
dry cloth. If it is out of order, take
it to your service provider.
174
When the "Messages full"
message appears:
The received or saved messages
are full in your phone memory.
You need to delete the message
to receive or send messages.
When the "Phone and SIM
messages is full. Delete
Messages" message appears:
The received or saved messages
are full in your phone and SIM
card memory. You need to delete
the message to receive or send
messages.
When the "Password" message
appears in Phone locked state:
Enter the phone password. The
default password is"1234". If you
cannot remember the password,
contact the nearest carrier.
When the "Enter PIN1" message
appears:
Input PIN1. If you cannot
remember it, contact your
service provider. You can still
receive calls even if your mobile
phone becomes locked after
entering the incorrect PIN1 on
three consecutive attempts.
Appendix
When the "No Service" or
"Network Search" appears:
If you cannot make/receive a
call when you are indoors or
undergrounds where the signal
strength is poor, move toward
a window or go out to an open
area. If you still cannot make a
connection, contact your service
provider.
Troubleshooting
checklist
When audio quality is poor:
End a call and try again.
01
02
03
04
05
06
01
02
03
04
05
06
07
175