Pantech ADR930 Perception User Manual

Pantech ADR930 Perception
U
FRONT VIEW
1. Earpiece
3. Volume Keys
2. Microphone
REAR VIEW
1. Micro USB/
Charger Port
2. Speaker
3. Power/Lock Key
M
sers anUal
4. Proximity Sensor
5. Front Camera
6. Touchscreen
4. Headset Jack
5. Rear Camera
6. Flash
7. NFC Touchpoint

Key Functions

FRONT VIEW
1. Earpiece: Listen to callers. In Speakerphone mode, captures your voice.
While recording video, captures audio. Avoid covering the sub-microphone
during Speakerphone mode or when recording video.
2. Microphone: Allows callers to hear your voice and when recording.
3. Volume Keys: From the Home screen, press to adjust Master Volume. During
calls or music playback, press to adjust volume. Press to mute the ringtone of
an incoming call.
4. Proximity Sensor: Detects the presence of nearby objects to control screen
display, such as when you hold the phone to your ear during a phone call.
5. Front Camera: Used when taking self-photos or recording videos.
6. Touchscreen: Allows a user to interact with the phone by touching areas on
the screen.
REAR VIEW
1. Micro USB/Charger Port: Connect a USB cable / Charger cable for charging
or to sync music and files.
2. Speaker: Plays ringtones, call audio when in Speakerphone mode, music and
other sounds.
3. Power/Lock Key: Press and hold to turn the phone on or off. Press to lock
the phone, or to wake the screen for unlocking.
4. Headset Jack: Plug in an optional headset or TTY equipment.
5. Rear Camera: Used when taking photos or recording videos.
6. Flash: Used when taking photos to brighten up scenery.
7. NFC Touchpoint: allows users to exchange data, such as a contact or
webpage, between NFC-enabled smartphones.

Getting Started

THE BATTERY
Installing the battery
• Use the groove at the bottom of the smartphone to lift the cover from the
smartphone.
• Insert the battery into the phone, aligning the gold contacts on the battery with
the gold contacts in the phone. Push down on the bottom of the battery until it
snaps into place.
• Replace the cover. Insert the top of the cover, press the sides into place, and
then press the bottom into place.

Removing the battery

• Remove the battery cover.
• Lift the battery up and out of the phone, using the slot provided.
• Replace the battery cover.