Pantech AT&T P2030 User Manual page 12

Installing/removing SIM card
and battery
1. Remove the
battery cover
from the unit.
To fit the battery
cover, put it on
the guide rail and
push up.
Correct Incorrect
18
2. Insert the SIM card
into the slot.
The gold contacts
of the SIM card
should go against
the metal contacts
of the phone.
Put the contacts of
the battery into the
hole located at the
bottom of the unit
and then insert
and press the upper side of
the battery until you hear
the "click". Make sure you
align the gold contacts at the
battery end with contacts on
the phone. If the contacts at
the battery are not properly
aligned, damage could occur
to the phone and the battery.
Correct Incorrect
3. To remove the
battery, push the
bottom of the
battery to upwards
(1) and remove (2)
the battery.
Push the SIM card
Getting started
in the arrow direction as shown.
To charge your
battery
1. To charge,
connect the
charger adapter
as shown right.
Correct Incorrect
Correct Incorrect
19