Table of Contents
Advertisement
SPECIFICATIONS
General
Power Source Required:
Power Consumption:
Ambient Operating Temperature:
Ambient Operating Humidity:
Dimensions:
Weight:
Input
Video Input:
Audio Input:
Image Process
Compression System:
Pixel Rate:
Refresh Rate:
Output
Video Output:
Video Output Front Panel:
Audio Output:
Audio Output Front Panel:
Spot Monitor Output:
Multi-screen Monitor Output:
Control Port
Alarm/Remote Port:
RS-485 (PS
Data):
•
RS-232C:
10/100BASE-TX Port:
Hard Disk Drive
Built-in:
Extension:
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.
78
120 V AC, 60 Hz
35 W
+5 °C - +45 °C (41 °F – 113 °F)
Less than 85 %
420 mm (W) x 44 mm (H) x 350 mm (D)
16-9/16" (W) x 3-7/16" (H) x 13-3/4" (D)
5.2 kg (11.4 lbs.)
1.0 V[p-p]/75
Composite video signal with 75
through (x8)
–10 dB 10 k unbalanced, RCA standard jack
JPEG
720 x 240
30 FPS maximum
1.0 V[p-p]/75
Composite video signal/Looping through (x8)
1.0 V[p-p]/75
Composite video signal (x1)
–10 dB 600
unbalanced, RCA standard jack (x1)
–10 dB 600
unbalanced, RCA standard jack (x1)
1.0 V[p-p]/75
Composite video signal (x1)
1.0 V[p-p]/75
Composite video signal (x1)
25-pin Full Pitch D-sub connector (x1)
Alarm Input 1-8, Alarm Reset Input, EXT REC Input, Time Adjust Input, Sequence
Input: Low-active, Non-voltage N.O. Contact, 100 ms
Alarm Output 1, Alarm Recovery Output 1, Disk End Status Output, Time Adjust
Output, Warning Output, REC Status Output, Play Status Output,
Sequence Output: Low-active, Open-collector, 24 VDC 100 mA max.
Alarm Output 2: High-active, 12 V 4.7 k
Alarm Recovery Output 2: High-active, 12 VDC 220
6-conductor modular jack (RJ-11)
9-pin Full Pitch D-sub connector
10Base-T and 100Base-TX, 8-conductor modular jack (RJ-45)
Protocol Installed: TCP/IP, HTTP, FTP, SMTP, SNMP
Security: Password-protected
120 GB (x1)
Optional 1 unit, available using built-in bracket
Automatic Termination / Looping
Advertisement
Table of Contents
