Stiga MP 900 Li 48 Operator's Manual page 24

Battery powered pole-mounted pruner
Hide thumbs Also See for MP 900 Li 48:
Table of Contents

Advertisement

• Only use the guide bar and chains
recommended
Unsuitable guides and chains can cause the
chain to break and/or kickbacks.
• Follow the manufacturer's instructions
regarding sharpening and maintenance of
the chainsaw. A decrease in the level of depth
can cause an increase in kickbacks.
• Techniques for using the electric chainsaw
(battery-operated)
Always observe the safety regulations and
use the most suitable cutting techniques
according to the work to be performed, following
the instructions and examples in the user
instructions.
• Safe carrying of the electric chainsaw
(battery-operated)
Whenever the machine is to be handled or
transported you must:
– turn off the motor, wait for the chain to stop
and unplug the machine from the mains
(remove the battery from its housing );
– apply the protection bar cover;
– only hold the machine using the handles and
position the bar in the opposite direction to
that used during operation;
When using a vehicle to transport the machine,
position it so that it can cause no danger to
persons and fasten it firmly in place.
• Recommendations for first-time users
Before felling or delimbing for the first time, make
sure:
– to have been specifically trained to use this
type of equipment;
– to have carefully read the safety regulations
and user instructions contained in this
manual;
– you practise first on logs on the ground or
attached to trestles, in order to get familiar
with the machine and the most suitable
cutting techniques.
• Handling and correct use of battery-
operated power tools
a) Make sure that the machine is switched
off before inserting the battery. Inserting
a battery in an electric device which is
switched on can cause accidents.
b) Charge battery packs only with the chargers
recommended by the manufacturer. Battery
chargers are generally specific for each
battery type; use with other types can cause
fire risks.
c) Use only batteries specifically designed for
your power tool. The use of other batteries
may cause injuries and fire risks.
d) Keep all unused batteries at a distance
from paper clips, coins, keys, nails, screws
by
the
manufacturer.
or other small metal objects as contact with
the same can cause short circuits. Short
circuits between battery contacts can lead
to explosion or fires.
e) Batteries in poor condition can cause
liquids to leak. Avoid contact with the liquid.
In the case of accidental contact flush with
water. If the liquid comes into contact with
the eyes, also seek medical advice. Liquid
leaking from the battery may cause skin
irritation or burns.
f) Check that the accumulator is in good
condition and there are no signs of damage.
Do not use the device with a damaged or
worn accumulator.
2.4 BATTERY / BATTERY CHARGER
ATTENTION
The following safety rules complement the safety
rules contained in the battery charger manual.
• Only use battery chargers recommended by
the manufacturer to recharge batteries. An
inadequate battery charger may cause electric
shock, overheating or corrosive liquid to leak
from the battery.
• Use only batteries specifically designed for
your power tool. The use of other batteries may
cause injuries and fire risks.
• Before inserting the battery, make sure that the
battery backpack selector is to "OFF" position.
Inserting a battery in a machine which is
switched on can cause a fire.
• Keep all unused batteries at a distance from
paper clips, coins, keys, nails, screws or other
small metal objects as contact with the same
can cause short circuits. Short circuits between
battery contacts can lead to explosion or fires.
• Never use the battery charger in environments in
the presence of vapours, flammable substances
or on easily flammable surfaces such as paper,
fabric, etc. The battery charger heats up during
recharging and may cause a fire.
• When transporting batteries, make sure the
contacts never come into contact with each
other and never use metal containers to
transport them.
2.5 PROTECTING THE ENVIRONMENT
Safeguarding the environment must be a relevant
and priority aspect of machine use, of benefit to
the community and the environment we live in.
• Avoid being a disturbance to the neighbourhood.
Use this machine at reasonable times of the day
only (not early morning or late evening when the
noise could cause disturbance).
EN - 5

Advertisement

Table of Contents
loading

Table of Contents