About The Hdd Disk Menu; Display Of The Hdd Disk Menu Disk Configuration Menu Screen - Panasonic WJ-HD316 Operating Instructions Manual

About the HDD DISK MENU

The operations regarding the hard disk can be performed with displaying the "HDD DISK MENU" on the monitor 2.
The "HDD DISK MENU" will be displayed when the SET button is pressed while displaying the system check complete window.
The "HDD DISK MENU" will also displayed automatically after the replacing or removing the hard disk.
The following operations can be performed on the "HDD DISK MENU".
Setting item
Format
Mirror recovery
Mirror cancel
Remove Link
Restart
Exit

Display of the HDD DISK MENU Disk configuration menu screen

Information of the hard disk drive of the unit or the extension unit will be displayed on the "HDD DISK MENU".
HDD DISK MENU
Digital Disk Recorder
WJ-HD300 TOP MENU
Format Mirror ON Mirror OFF Remove Link
1 2
MAIN 120GB M 120GB M
EXT7 120GB 120GB
EXT6 120GB 120GB
120GB 120GB
EXT5
*(120GB) *(ERROR)
EXT4
ADD (120GB) ADD (ERROR)
EXT3
120GB 120GB
EXT2
LOST -
EXT1
SET : [ SET ]
120 GB: Indicates the hard disk capacity (disk existed
when started up last time)
120 GB M: Indicates the hard disk capacity (mirrored disk
existed when started up last time)
ADD (120 GB): Indicates that this hard disk is newly mount-
ed at this startup, but it was not mounted last time.
Those parenthesized numbers indicate the capacity of
the hard disk.
ADD (ERROR): Indicates that this hard disk is newly
mounted at this startup, but it was not mounted last
time. Then, an error is detected in the hard disk.
* (120 GB): Indicates that a different hard disk from the one
existed at the last startup is mounted. Those parenthe-
sized numbers indicate the capacity of the hard disk.
* (ERROR): Indicates that a different hard disk from the one
existed at the last startup is mounted, and an error is
detected in the hard disk.
LOST: Indicates that a position where a hard disk was
mounted at the last startup has no hard disk.
–: Indicates that a hard disk is not mounted this time as well
as at the last startup.
Description
Formats (initializes) the hard disk. It can also change setting values for the
recording area respectively. Mirroring also can be started on this menu.
Recovers the mirrored hard disk.
Cancels mirroring.
Removing the hard disk drive from the system logically.
Restarts this unit.
Close the "HDD DISK MENU".
Restart Close
3 4
120GB 120GB
120GB 120GB
120GB 120GB
120GB 120GB
120GB 120GB
120GB 120GB
- -
Main unit/extension unit
Information about hard disk located in the main unit and extension unit
ERROR: Indicates that the hard disk had failed to be initial-
ized.
Important:
• It is impossible to operate the unit when there is a hard
disk with indications of * (capacity), * (ERROR), LOST
or ERROR. In this case, remove the relevant hard disk.
(Refer to page xx.)
• Hard disks with ADD (capacity) indication are not initial-
ized yet.
First, initialize them. It is impossible to record images on
it nor to use as a copy destination without initialization.
Note: The displayed available disk space on this menu will
not include the space required for data management.
Therefore, the undercounted available disk space will be
displayed. It is possible to display information about the
recording area (allocated disk size for normal recording
area, event recording area, copy area) by pressing the
SEUP/ESC button while displaying the "TOP MENU" of the
"HDD DISK MENU".
Page
xx
xx
xx
xx
xx
xx
123