Delete The Motion Detection Area - Panasonic WJ-HD316 Operating Instructions Manual

[Screenshot 2]
The "VMD Setup" window will be displayed.
x Rotate the jog dial to select "SETUP AREA" on the status
bar.
Note: To set all areas on the monitor as the motion
detection area, select "ALL AREA" and press the
SET button.
[Screenshot 3]
The cross cursor will be displayed on the "VMD Setup" win-
dow.
c Move the cross cursor to a desired point to be set as
the start point of the motion detection area using the
arrows button, and press the SET button.
[Screenshot 4]
The start point of the motion detection area is allocated.
v Move the cross cursor to a desired point to be set as
the end point of the motion detection area using the
arrows button, and press the SET button.
94
[Screenshot 5]
The motion detection area is set with the start point and the
end point as the points at opposite angles of the motion
detection area.
b Repeat steps 3 and 4 to set another motion detection
area.
Up to 4 areas can be set. Created areas will be named
automatically as A, B, C and D in the created order.
n To complete the settings, rotate the jog dial to select
"EXIT" on the status bar, and press the SET button.
The "VMD Setup" window will be closed.

Delete the motion detection area

[Screenshot 1]
Start operation from the "VMD Setup" window.
z Rotate the jog dial to select "DELETE AREA" on the sta-
tus bar.
Note: After selecting "DELETE ALL AREA", pressing the
SET button will delete all of the motion detection
area.
[Screenshot 2]
The cross cursor will be displayed on the "VMD Setup" win-
dow.