Flexible Recording Mode (Fr); One Touch Recording-Specify A Time To Stop Recording - Panasonic DMR E50 Operating Instructions Manual

Flexible recording mode (FR)

The unit calculates a recording rate that enables the recording to fit
in the time you set (within the remaining time on the disc) and with
the best possible picture quality.
1
While stopped
Press [F Rec] (27).
FLEXIBLE RECORDING
Recording in FR mode
Maximum rec. time 1 Hour 23 Min.
Set rec. time 1 Hour 23 Min.
Start Cancel
SELECT
RETURN
ENTER
Press [3, 4, 2, 1] (10) to set the recording time.
2
3
To start recording
Press [3, 4, 2, 1] (10) to select "Start" and press
[ENTER] (10).
≥Recording starts.
For your reference
≥Press [STATUS] (28) during recording to show the remaining
time.
DVD-RAM
REC 83
BBC1
LR
≥It is not possible to change channel or recording mode while
flexible recording is paused.
≥Recording time reduces if you repeatedly pause recording.
Recording television programmes (continued)
One Touch Recording—Specify a time to
stop recording
[RAM] [DVD-R]
Main unit only
This is a simple way of making timer recordings when you are in a
hurry or before you go to bed. You can set the time up to 4 hours in
advance.
While recording
Press [¥, REC] (16) on the main unit to select the
recording time.
The time increases as illustrated each time you press the button.
The counter decreases in 1-minute units after you set a time. You
can change the time again with the same operation.
When the time you set is reached, recording stops and the unit
switches to standby.
Unit's Display
(Counter) # 30 # 60 # 90
^ 240 ! 180 ! 120 !}
(2)
(2) Shows recording will stop in 30 minutes
ªTo cancel
During recording, press [¥, REC] (16) until the counter appears.
≥Recording continues.
ªTo show the time remaining until recording finishes
Press [STATUS] (28) several times.
DVD-RAM
REC/OTR 30
BBC1
LR
For your reference
≥This does not work during timer recordings or while using flexible
recording.
≥You cannot use the remote control to specify a time for recording
to stop.
≥Recording stops and the set time is cleared if you press [∫] (7).
≥The set time is cleared if you change the recording mode or
channel while recording is paused.
27