Checking The Recording During Recording (Time Slip); Watching The Television While Recording; Using The Functions Window; About The Functions Window - Panasonic DMR E50 Operating Instructions Manual

Playing while you are recording (continued)
Checking the recording during recording
(TIME SLIP)
[RAM]
You can play the programme being recorded to check that it is
being recorded correctly. You can also check parts that were
recorded previously.
Preparation
Switch [DVD, TV] (15) to "DVD".
While recording or timer recording
Press [TIME SLIP] (25).
Play starts 30 seconds previous.
PLAY
(1)
0 min
REC
(2)
(1) Play images (30 seconds before)
(2) Current recording
ªTo change the part being played
Press [3, 4] (10) to enter the time.
≥Press [3] (10) to increase or [4] (10) to decrease in one-minute
units. Press and hold [3] (10) to increase or [4] (10) to
decrease in 10-minute units.
PLAY
–5 min
REC
ªTo show the play images in full
Press [TIME SLIP] (25).
≥Press [TIME SLIP] (25) to return to the picture-in-picture screen.
ªTo stop play and recording
1) Press [∫] (7). Play stops.
2) (Wait 2 or more seconds)
Press [∫] (7). Recording stops.
≥You cannot stop recording with [∫] (7) during timer
recording. To stop timer recording, press [
For your reference
≥The sound for the images being played is heard during Time Slip.
≥While this function is activated, TIME SLIP (44) indicator lights
up.
≥The image on the small screen may be distorted or flicker
depending on the scene. However, this does not affect the image
recorded.

Watching the television while recording

Preparation
Switch [DVD, TV] (15) to "TV".
Press [AV] (3) to change the input mode to "TV".
1
Press [W, X, CH] (18) to change channels.
2
≥You can also select the channel with the numeric buttons (4).
For your reference
≥You can also do this if the unit is making a timer recording.
≥The recording is unaffected.

Using the FUNCTIONS window

About the FUNCTIONS window

Most of the features and functions of this unit can also be
controlled with icons. The examples show the FUNCTIONS
window when a DVD-RAM is being used. Actual menus depend on
the type of disc being used.
Disc display
FUNCTIONS
SELECT
ENTER
RETURN
(1) Disc title
≥The disc's title is displayed if one is recorded. You can enter
titles with Enter Title in DISC INFORMATION (page 37).
(2) Disc protection
≥"On" is displayed if you have used Disc Protection in DISC
INFORMATION to protect the disc (page 38).
(3) Cartridge Protection
≥"On" is displayed if the cartridge's write protect tab is
switched to "PROTECT" (page 73).
Using the FUNCTIONS window
[RAM] [DVD-R] [DVD-V] [CD] [VCD] [MP3]
Preparation
Switch [DVD, TV] (15) to "DVD".
1
While stopped
Press [FUNCTIONS] (11) to show the FUNCTIONS
window.
FUNCTIONS
SELECT
ENTER
Use [3, 4, 2, 1] (10) to select an item.
2
≥Refer to the relevant pages for details.
, TIMER] (12).
Press [ENTER] (10).
3
≥Your selection is entered and the FUNCTIONS window
disappears. If the operation requires further selections,
another screen appears.
ªTo clear the FUNCTIONS window
Press [FUNCTIONS] (11) or [RETURN] (23).
30
(1) (2)
DVD-RAM
Disc Protection Off
Cartridge Protection Off
DISC INFORMATION DIRECT NAVIGATOR CREATE PLAY LIST
TIMER RECORDING PLAY
SETUP TOP PLAY
DVD-RAM
Disc Protection Off
Cartridge Protection Off
DISC INFORMATION DIRECT NAVIGATOR CREATE PLAY LIST
TIMER RECORDING PLAY PLAY LIST
RETURN
TOP PLAY FLEXIBLE REC
SETUP
(3)
PLAY LIST
FLEXIBLE REC