To Set Up This Dvd Recorder With An Existing Q Link Tv; Auto Setup (Without Q Link Functions) - Panasonic DMR E50 Operating Instructions Manual

To Set Up this DVD Recorder with an existing Q Link TV

1
Switch the TV on.
2
Select the AV input on your TV.
Switch [DVD, TV] (15) to "DVD".
3
Press [Í] (1) to switch the DVD Recorder on. Downloading of the setup data starts automatically.
4
Download
Pos 4
Download in progress, please wait.
RETURN : to abort
RETURN
5
To set up the Owner ID, repeat the steps 3-8 on the previous page.
Owner ID
PIN number
¢¢¢¢
Name
¢¢¢¢¢¢¢¢¢¢¢¢¢¢
House No.
¢¢¢¢¢¢¢¢¢¢¢¢¢¢
Postcode ¢¢¢¢¢¢¢¢¢¢¢¢¢¢
RETURN
RETURN : leave
Auto Setup automatically tunes all available stations and sets the DVD Recorder's clock to the current date and time.
1
Switch the TV on.
2
Select the AV input on your TV.
Switch [DVD, TV] (15) to "DVD".
3
Press [Í] (1) to switch the DVD Recorder on.
4
≥Auto Setup starts. This takes about 5 minutes.
≥(If connected to your TV using the RF lead only)
Select an unused channel pre-set on your TV and tune it to the RF output channel number shown on the DVD Recorder display (or until
you can clearly see the Auto Setup screen). Store the new video playback channel (refer to the instructions for your TV).
Auto-Setup
Ch 4
Auto-Setup in progress, please wait.
RETURN : to abort
RETURN
5
To set up the Owner ID, repeat the steps 3-8 on the previous page.
Owner ID
PIN number
¢¢¢¢
Name
¢¢¢¢¢¢¢¢¢¢¢¢¢¢
House No.
¢¢¢¢¢¢¢¢¢¢¢¢¢¢
Postcode
¢¢¢¢¢¢¢¢¢¢¢¢¢¢
RETURN
RETURN : leave
When no stations have been set, confirm all connections and restart Auto Setup
See page 66 and Hint below.
To restart Auto Setup
≥You can restart Auto Setup, without using remote controller, by pressing some buttons on the front of the unit. Hold down [W, CH] (18) and
[X, CH] (18) on the main unit simultaneously for about 5 seconds.

Auto Setup (without Q Link Functions)

Auto Setup (with Q Link Functions) (continued)
17