Index Search Functions - Panasonic AG-EZ50UP Operating Instructions Manual

1,
MENU
PUSH
VOL/JOG
2,
DATE/
OSD
TIME
COUNTER RESET
MULTI/
REC
P-IN-P
8
/REW PLAY
STILL ADV PAUSE
K
INDEX STOP
SELECT
VAR.
SEARCH
STORE
OFF/ON
P.B.DIGITAL
INDEX
1
S 1
2
30

Index Search Functions

To facilitate searching of desired scene, this Camera/Recorder automatically
records index signals during recording, as explained in the following.
Photoshot Index Signal
These signals are automatically recorded whenever still pictures are taken in
Photoshot Mode (l 21) or whenever you copy pictures on a Memory card to
a cassette (l 36).
When recording still pictures using the Continuous Photoshot Mode (l 21),
the index signal is not recorded.
Scene Index Signal
Scene Index Signals are automatically recorded when you start recording
after inserting a Cassette.
However, if the Camera/Recorder is switched from the VCR Mode to Camera
Mode or if the date and time are set before the start of recording, the index
signal is not recorded.
≥If [INDEX] of [RECORDING SETUP] Sub-Menu on the [CAMERA
FUNCTIONS] Main-Menu is set to [2HOUR], an index signal is recorded
when Recording is restarted after a lapse of 2 hours or longer. If it is set to
VIDEO CAMERA
START/ [DAY], an index signal is recorded when recording is restarted after the date
PHOTO
STOP
SHOT
has changed since the last recording. (While the index signal is recorded,
TITLE
the [INDEX] Indication
ZOOM
T
A.DUB
ª Photoshot Index Search
9
FF/
W
1
STILL ADV
L
2
INDEX
P.B.
≥With each press of the corresponding button, still pictures recorded in
ZOOM
Photoshot Mode are searched.
MENU
≥After Pictures with Sounds are played back for 4 seconds, the Camera/
SET
Recorder switches to the Still Playback Mode.
ITEM
ª Scene Index Search
1 Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >>
2 Press the [9] Button
≥When the corresponding Button is pressed once, the [S 1] Indication
appears, and searching of the subsequent scene marked with an index
signal starts. Each time the button is pressed after the start of Scene Index
Search the indication changes from [S 2] to [S 9], and the beginning of the
scene corresponding to the selected number will be searched. After
reaching the desired scene, playback starts automatically.
≥Up to 9 scene numbers can be selected.
Top Scan
If the [
the Camera/Recorder will scan for scenes (or PhotoShots) and playback the
first few seconds of each. (To cancel, press the [
Button
≥For other notes, see page 47.
1
flashes for a few seconds.)
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >>
[INDEX] >> [PHOTO].
Press the [9] Button
Remote Controller.
[INDEX] >> [SCENE].
Remote Controller.
9 :
] Button or the [
4
.)
:
1
or the [ ] Button
:
1
or the [ ] Button
] Button is pressed for more than 2 seconds,
1
] Button
2
on the
2
on the
2
3 ∫
or the [ ]