Recording In Natural Colors (White Balance); Adjusting White Balance Manually - Panasonic AG-EZ50UP Operating Instructions Manual

1
AUTO
MANUAL
AE LOCK
2
W.B.
1
2 4
3 5
2
W.B.
MNL
1
10 000K
9 000K
8 000K
7 000K
6 000K
5)
5 000K
1)
6)
4 000K
7)
3 000K
8)
9)
2 000K
10)
1 000K
Recording in Natural Colors
Depending on the scene or lighting conditions, the Automatic White Balance
Adjustment Mode may not be able to bring out natural colors. In such a case,
the white balance can be adjusted manually.
1
Set the Mode Selector Switch to [MANUAL].
≥The [MNL] Indication appears.
2
Press the [W.B.] Button repeatedly to set a desired White
Balance Mode.
1
Automatic White Balance Adjustment
2
Indoor Mode (shooting under incandescent lamp)
3
Outdoor Mode
4
Fluorescent light Mode
5
The White Balance setting that was previously set manually
To Resume Automatic Adjustment
Press the [W.B.] Button repeatedly until no Indication appears. Or, set the
Mode Selector Switch to [AUTO].
≥For other notes, see page 47.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Adjusting White Balance Manually

1 When the Auto White Balance Adjustment function does not operate under the
existing light conditions, use the Manual White Balance Adjustment mode.
AUTO
1
Set the Mode Selector Switch to [MANUAL].
MANUAL
AE LOCK
≥The [MNL] Indication appears.
2
Point the Camera/Recorder at a full-screen white subject,
and then hold down the [W.B.] Button until the [
Indication stops flashing.
≥The [1] Indication appears after the screen has darkened for a
moment.
≥When the [1] Indication flashes after turning the Camera/Recorder
on, the previously adjusted white balance setting is still kept.
To Resume Automatic Adjustment
Press the [W.B.] Button repeatedly until no Indication appears. Or, set the
Mode Selector Switch to [AUTO].
About White Balance Sensor
2
The White Balance Sensor
during recording.
1
≥Do not cover the White Balance Sensor with your hand during recording.
Otherwise, White Balance will not function normally.
≥The red light from the Tally Lamp
object, possibly causing the White Balance sensor to operate incorrectly
and changing the coloring.
2)
Use of Auto White Balance Adjustment in inappropriate lighting conditions may
result in reddish or bluish images. Where the subject is found on the left but
3)
surrounded by many light-sources, Auto White Balance Adjustment may not
operate properly. In such case we suggest that you adjust the White Balance.
4)
1) The range that is controlled by the Auto White Balance Adjustment Mode
of this Camera/Recorder
2) Blue sky
3) Cloudy sky (Rain)
4) TV screen
5) Sunlight
6) White fluorescent light
7) Halogen light bulb
8) Incandescent light bulb
9) Sunrise and sunset
10) Candlelight
≥For other notes, see page 47.
(White Balance)
1
determines the nature of the light source
2
will be reflected off your hand or
1
]
25