Playing Back On Your Tv; Audio Dubbing - Panasonic AG-EZ50UP Operating Instructions Manual

[S-VIDEO IN]
[VIDEO IN]
AV IN/OUT
[AV IN/OUT]
PHONES
1
S-VIDEO IN/OUT
[S-VIDEO IN/OUT]
2
3
VIDEO CAMERA
START/
DATE/ PHOTO STOP
OSD SHOT
TIME
COUNTER RESET TITLE
ZOOM
T
MULTI/
REC A.DUB
P-IN-P ¥
V /REW PLAY FF/ W
W
6 1 5
STILL ADV PAUSE STILL ADV
E ; D
INDEX STOP INDEX
K L
∫
SELECT
VAR. P.B.
SEARCH ZOOM
STORE
MENU
SET
OFF/ON
ITEM
P.B.DIGITAL
PUSH
VOL/JOG
1, 2
VIDEO CAMERA
START/
DATE/ PHOTO
STOP
OSD
TIME SHOT
COUNTER RESET TITLE
ZOOM
T
MULTI/
REC A.DUB
¥
P-IN-P
3
V /REW PLAY FF/ W
W
6 1 5
STILL ADV PAUSE STILL ADV
3, 5
E ; D
INDEX STOP INDEX
K L
∫
SELECT
VAR. P.B.
SEARCH ZOOM
STORE
MENU
SET
OFF/ON
ITEM
P.B.DIGITAL
1 2
A.DUB; A.DUB!

Playing Back on Your TV

By connecting your Camera/Recorder with your TV, the recorded scenes can
be viewed on your TV screen.
≥Before connecting them, turn off the power of both the Camera/Recorder
and TV.
1
Connect the [AV IN/OUT] Jack of the Camera/Recorder to the
Video and Audio Input Jacks of the TV.
≥Using the A/V Cable
[AUDIO IN]
the TV has an S-Video Jack, connect the S-Video Cable (not supplied)
2
, too. You may then remove the composite video (yellow) plug.
Making the Indications Appear on the TV screen
Press the [OSD] Button
≥Be sure to select the proper input on your TV. (If necessary, consult your
TV's operating instructions.)
≥If you play back a Cassette recorded with copyright protection signals, the
screen becomes blue or displays mosaic-like noise patterns.
≥If you set [AV JACK] on the [AV IN/OUT SETUP] Sub-Menu to [IN/OUT],
nothing will be shown on the TV screen except during playback.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Audio Dubbing

You can add music or narration to the recorded Cassette.
≥If you perform audio dubbing onto a tape that was recorded with [AUDIO-
REC] on the [RECORDING SETUP] Sub-Menu of the [CAMERA
FUNCTIONS] Main-Menu set to [16bit], the original sound is erased. (If you
want to preserve the original sound, use the [12bit] Mode when recording.)
≥Audio Dubbing cannot be performed onto recordings made in LP Mode.
(l 19)
1
Set [VCR FUNCTIONS] >> [AV IN/OUT SETUP] >> [AV JACK]
>> [IN/OUT].
2
And then select [A.DUB INPUT] >> [MIC] or [AV IN].
≥Set to [AV IN] when external sound equipment is used, or set to [MIC]
MENU
when an external or built-in microphone is used.
3
Press the [
point where you want to start dubbing.
4
Press the [A.DUB] Button on the Remote Controller.
≥[A.DUB;] Indication appears.
5
To start Audio Dubbing, press the [;] Button on the Remote
4 Controller.
≥[A.DUB!] Indication appears.
To Stop Audio Dubbing
Press the [;] Button on the Remote Controller.
The Camera/Recorder is in the Still Playback Mode again.
Playing Back the Sound Recorded with Audio Dubbing
(For 12 bit Audio Recording)
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >> [AUDIO] >> [ST2]
or [MIX].
ST1: Play back only the original sound.
ST2: Play back only the sound added by Audio Dubbing
MIX: Play back both the original sound and the sound added by Audio
Dubbing simultaneously.
≥For other notes, see page 48.
1
(supplied), make a connection with the TV. If
3
on the Remote Controller.
1 ] Button, and then press the [
1
2
; ] Button at the
33