Panasonic AG-EZ50UP Operating Instructions Manual page 47

ª Manual Shutter Speed Adjustment
≥You may see vertical lines of light in the playback image of
a brightly shining subject or highly reflective subject.
≥During Normal Playback, transition from one scene to
another may not look smooth.
≥Because the color and brightness of the playback image
may become unstable, avoid recording under fluorescent
light, mercury light, or sodium light.
≥If you are using either Gain-up Mode or Program AE Mode,
you cannot adjust the shutter speed. If the shutter speed is
adjusted manually, this setting will be cancelled.
ª Manual Iris Adjustment
≥Depending on zoom magnification, the iris value may not
be displayed correctly.
≥If you are using either Gain-up Mode or Program AE Mode,
you cannot adjust the iris. If the iris is adjusted manually,
those Modes will be cancelled.
≥The [OPEN] iris value is displayed as [F1.6] in the camera
data ( l 17) .
≥When you use Gain-up Mode, the range of selectable iris
value is limited up to [OPEN6dB].
ª White Balance
( l 25)
≥In the Automatic White Balance Adjustment Mode, the
[AWB] Indication appears for the camera data. ( l 17)
In the following cases, You cannot change White
Balance:
≥When you set [EFFECT1] of [DIGITAL EFFECT] Sub-
Menu on the [CAMERA FUNCTIONS] Main-Menu to
[GAIN-UP] or [EFFECT2] to [SEPIA] or to [MONO].
≥When you set the Zoom to 10 t or higher, you cannot
change the White Balance.
≥During Digital Still Picture Mode.
≥When you display a Menu.
In the following cases, the [ 1 ] Indication flashes:
≥The flashing indicates that the previously adjusted White
Balance setting is still kept. This setting will be kept until
White Balance is adjusted again.
≥You may not be able to achieve correct White Balance
adjustment manually under weak illumination.
ª Digital Effect Functions (Camera Mode)
( l 26)
≥If you set [EFFECT1] on [DIGITAL EFFECT] Sub-Menu to
[GAIN-UP], you need to adjust the focus manually.
However, you cannot adjust the shutter speed and select
the White Balance.
≥If [EFFECT2] on the [DIGITAL EFFECT] Sub-Menu is set
to [MONO] or [SEPIA], the selected White Balance Mode
cannot be changed.
≥You cannot use Sports Mode, Portrait Mode and Low Light
Mode with Gain-up Mode [GAIN-UP].
In the following cases, using the [EFFECT1] on the
[DIGITAL EFFECT] Sub-Menu (including Multi-Picture
Mode & P-IN-P Mode) is not possible.
≥Frame Mode
≥When [PROGRESSIVE] is set to [ON]
≥Card Photoshot Mode
In the following case, using the Digital Effect Function
(including Multi-Picture Mode & P-IN-P Mode) is not
possible.
≥Card Photoshot Mode
( l 24)
( l 24)
ª Wipe Mode and Mix Mode (Camera Mode)
( l 26)
If either one of the following operations is carried out, stored
images will be erased, and Wipe and Mix Functions cannot
be used.
≥Use the Camera Search Function.
≥Press the [CAMERA STILL] Button.
≥Switch the [TAPE/CARD] Selector.
≥Slide the [OFF/ON/MODE] Switch.
≥Selecting any other digital effect function on the [DIGITAL
EFFECT] Sub-Menu.
ª Multi-Picture Mode (Camera Mode)
≥If the [MULTI] Button is pressed while self-recording Mirror
mode ( l 20) is used, the still picture is displayed from the
upper right corner of the screen, but, in reality, the picture
is recorded from the upper left corner as usual.
≥The quality of images recorded in Multi Mode deteriorates
slightly.
≥Multi Mode cannot be used in digital still picture mode
( l 21) or when Card Photoshot recording is set.
ª P-IN-P Mode
( l 27)
≥Pictures in P-IN-P Mode cannot be recorded with
Progressive PhotoShot.
≥If the Camera/Recorder power is turned off, the smaller
picture will disappear.
≥A title cannot be inserted into the smaller picture.
≥If the [CAMERA STILL] Button is pressed in P-IN-P Mode,
the setting is cancelled.
ª Index Search Functions
≥Index Search may not be possible at the beginning of tape.
≥Because Photoshot Index Signals are not recorded on still
pictures recorded in Continuous Photoshot Mode, the
Photoshot Index Function cannot be used for these still
pictures.
≥Scene Index Search may not function properly if the
interval between 2 scene index signals is shorter than
1 minute.
ª Playback Zoom Functions
≥You cannot adjust volume in Playback Zoom Mode.
≥If you turn off the Camera/Recorder or if you switch from
VCR Mode to Camera Mode, Playback Zoom Mode is
automatically cancelled.
≥Even if Playback Zoom Functions are being used, images
that are output from the DV Terminal are not enlarged.
≥As you enlarge an image, the quality of image suffers.
≥You cannot use the Mirror Mode of Digital Effects and the
Playback Zoom Functions simultaneously.
≥If you select Multi-Picture Mode in the Playback Zoom
Mode, equivalent magnification (1t) becomes zoom
magnification.
ª Playback Digital Effect Functions
≥Signals of images to which digital effects are added during
playback cannot be output from the DV Terminal.
≥You cannot use the Wipe Function or Mix Function while
playing back the non-recorded portion of tape.
≥You cannot use the Mirror Mode of Digital Effects and the
Playback Zoom Function simultaneously.
( l 27)
( l 30)
( l 31)
( l 31)
47