Index Search Functions - Panasonic PV-GS70 Operating Instructions Manual

WB/SHUTTER
IRIS/MF/VOL/JOG
1
MENU
PUSH
START/
DATE/ PHOTO
STOP
OSD SHOT
TIME
COUNTER RESET TITLE ZOOM
T
MULTI/
¥
REC A.DUB
P-IN-P
1
V /REW PLAY FF/ W
W
6 1 5
STILL ADV PAUSE STILL ADV
E ; D
2
INDEX STOP INDEX
K L
∫
SELECT
VAR. P.B.
SEARCH ZOOM
STORE
MENU
SET
OFF/ON
ITEM
P.B.DIGITAL
A
INDEX
B
S 1

Index Search Functions

To facilitate searching of desired scene, this Palmcorder
automatically records index signals during recording, as explained in
the following.
PhotoShot Index Signal
These signals are automatically recorded whenever still pictures are
taken in PhotoShot Mode (l 30).
When recording still pictures using the Continuous PhotoShot Mode
(l 30), the index signal is not recorded.
Scene Index Signal
Scene Index Signals are automatically recorded when you start
recording after inserting a Cassette.
However, if the Palmcorder is switched from the VCR Mode to
Camera Mode, or if the date and time is set before the start of
recording, the index signal is not recorded.
≥If [SCENE INDEX] of [RECORDING SETUP] Sub-Menu on the
[CAMERA FUNCTIONS] Main-Menu is set to [2HOUR], an index
signal is recorded when Recording is restarted after a lapse of
2 hours or longer. If it is set to [DAY], an index signal is recorded
when recording is restarted after the date has changed since the
last recording. (While the index signal is recorded, the [INDEX]
A
indication flashes for a few seconds.)
2
ª PhotoShot Index Search
1
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS]
>> [SEARCH] >> [PHOTO].
2
Press the [9] Button or the [:] Button on the
Remote Controller.
≥With each press of the corresponding button, still pictures recorded
in PhotoShot Mode are searched.
≥After pictures with sounds are played back for 4 seconds, the
Palmcorder switches to the Still Playback Mode.
ª Scene Index Search
1
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS]
>> [SEARCH] >> [SCENE].
2
Press the [9] Button or the [:] Button on the
Remote Controller.
≥When the corresponding button is pressed once, the [S 1]
B
Indication appears, and searching of the subsequent scene
marked with an index signal starts. Each time the button is pressed
after the start of Scene Index Search, the indication changes from
[S 2] to [S 9], and the beginning of the scene corresponding to the
selected number will be searched. After reaching the desired
scene, playback starts automatically.
≥Up to 9 scene numbers can be selected.
Top Scan
If the [9] Button or the [:] Button is pressed for more than
2 seconds, the Palmcorder will scan for scenes (or PhotoShots) and
play back the first few seconds of each. (To cancel, press the [1]
1
Button or the [∫] Button
≥For other notes, see page 89.
47
2
.)