Programmable Settings; Guide To Handset Programming; Main Menu Sub-Menu; Sub-Menu 2 Page - Panasonic KX-TG2388 Operating Instructions Manual

Guide to handset programming

For your reference, a chart of all programmable functions is printed below. Details for each
item can be found on the corresponding pages. To program, press {MENU}, press {V} or
{^} to scroll through the menu, and press {Select} when the desired menu item or setting
is displayed.
Important:
L Before programming, make sure the handset and base unit are not being used. The
handset must be operated near the base unit and while off the base unit or charger.
L You can also program features using "direct commands"—special codes that take you
directly to the feature you wish to program and allow you to select the desired setting
(page 37).
During programming:
L To exit programming, press {OFF} at any time.
L To go back to the previous menu, press {Back}.
L If you do not press any buttons for 60 seconds, the handset will exit programming mode.
L If the unit detects a problem, an error message will be displayed (page 60) and/or error
beeps will sound.
Main menu
Message play
Accessibility
Ringer setting
Date and time
Talk Caller ID
For assistance, please visit http://www.panasonic.com/consumersupport
Sub-menu 1
—
Base Announce
HS Announce
Hearing Aid Mode
Ringer volume
Ringer tone
Incoming call.
—
—

Programmable Settings

Sub-menu 2
—
Dial number
Pre-Dial number
Name List
—
—
—
—
—
—
Page
50
44
44
44
44
39
39
40
15
41
35