Orion HCCA HCCA25001 Owner's Manual page 24

an event, the priority of the amplifier is given to continually checking
its health. Attempts to Write to the amplifier during and immediately
following an event may result in communication errors.
Ordinarily, the amplifier should clear any faults when the condition
that causes them clears. Substantial changes to the amplifier param-
eters via the bitwriter may result in the audio being interrupted
momentarily. Also, the amplifier is designed to fade up from protec-
tion events and when turned on.
NOTE: The amplifier can be reset by removing power to the main
battery terminals and keeping the remote line off for at least 30
seconds.
The major and minor revision levels of the ESP2 software should be
referenced should it be necessary to contact Directed Electronics or
Orion.
© 2009 Directed Electronics. All rights reserved. 23