Advertisement
Take out the 4 QuadAir plastic legs and screw the adjustable
leg levelers onto the base of the legs. Place the legs on the
bottom surface of the table. Ensure alignment and then
attach with the big flathead screw M5x35 and washer M8x16.
*Make sure grey surface is facing out.
Attach power
cord to
cord holder.
Tightly attach.
(1) roundhead screw M8x25
(1) flat washer M8x16
Ensure all legs are tightly attached
then flip the table 90 degrees.
This action requires at least 6
people. Flip it another 90 degrees
to place the legs on the ground.
*Place the included foam padding
on either side of the goal release
bay. Do not damage the goal
bay or LED lights.
5
Finished picture
Attach the leg levelers
to the base of legs.
Grey surface
Foam
Padding
Advertisement
