Dyson Ball Animal User Manual page 11

Washing filter B
Remove your filter
Lay your machine on its side with the filter cover facing upwards.
Turn the lock in the center of the ball until the filter cover is released. Lift off
the filter cover.
Twist the filter counter-clockwise until it is released and lift it off your
machine.
Wash your filter
Wash the filter in a rotating motion.
Repeat until the water runs clear.
Tap the filter to remove excess water.
Dry your filter
Leave your filter to dry for at least 24 hours in a well-ventilated, warm place.
Don't dry your filter in a tumble dryer, microwave or near a naked flame.
Important: your filter must be completely dry before you put it back into the
machine. Your machine could be damaged if used with a damp filter.
Reassemble your filter
Place the filter back into position in the ball.
Twist the filter clockwise until it clicks into position.
Refit the filter cover and turn the lock until it clicks securely into the
closed position.
Remove the plug from
the power source.
The lock, located in the center of
the ball, has two finger recesses.
Hold the filter in
your hand with the
filter interior facing
upwards to enable
it to be filled with
water.
The filter is located
within the ball cover.
click
click