Function For Service (Network); Outline; Connection Procedure - Sony VPL-FH65 Service Manual

1-10. Function for Service (Network)

1-10-1. Outline

This unit is provided with a network terminal. Using a Web browser, it can check the state of a projector
and control and set the network blocks.
Additionally, this unit has Update function through a network as a service-dedicated function.
n
. This function can be operated only in Internet Explorer (version 9 or later), Firefox, or Chrome.
. All CPUs can be updated collectively via network and USB memory only when "System information"
is displayed by pressing the [*] button from the information screen of the menu.

1-10-2. Connection Procedure

1. Setting for connecting this unit using the network function
When using the function for service on the network of this unit, set this unit as follows.
. Connection/power setting
HDBaseT setting
LAN setting: LAN terminal
RS-232C setting: RS-232C
Power saving setting
Standby mode: Standard
Direct power on: OFF
. Setting of service menu (Device)
Other
34 232C (38.4k = 0/19.2k = 1/9.6k = 2): 0
61 232C Parity (No = 0/Odd = 1/Ev = 2): 2
62 232C StopBits:
2. Connection of this unit and PC
. When connecting this unit to PC directly, use the CAT5 cross cable so that the network setting of this
unit and PC are in the same subnet.
. When this unit is connected to LAN, connect PC to the LAN and adjust the PC network setting to the
LAN environment.
3. Check of IP address
Turn on the power of this unit to display the menu screen. Check the IP address of this unit on the [Con-
nection/Power Menu] screen of the menu.
1-46 (E)
1
VPL-FH60