Electrical Adjustment; Preparation - Sony VPL-FH65 Service Manual

2-3. Electrical Adjustment

2-3-1. Preparation

Required equipment
. NTSC, PAL, SECAM component signal generator:
Tektronix TG2000 + AVG1 (option module) + AWVG1 (option module) or equivalent
. VG (programmable video signal generator):
ASTRODESIGN VG-828 or equivalent
. Chroma meter:
KONICA MINOLTA CL-200 or equivalent
n
Allow the warm-up time of 10 minutes after the power is on before starting the V COM and white balance
adjustments.
How to enter the service mode
Main version checking method
1. Press the [MENU] button.
The menu appears.
2. Press the [&] button on the information screen.
When the system information is displayed:
When the system information is not displayed: v1.31.0 or earlier
In the case that the main version is v1.31.0 or earlier
1. Press the [MENU] button.
The menu appears.
2. Set the Status to "On" in the Operation menu.
3. Press the [MENU] button to close the MENU.
4. Press the buttons in the following order:
[ENTER] → [ENTER] → [&] → [ENTER]
The message "Do you want to enter the Service Mode? [Yes] [No]" appears.
Select [Yes] and press the [ENTER] button.
In the case that the main version is v1.40.0 or later
For details on how to enter the service mode, contact your local Sony Sales Office/Service Center.
VPL-FH60
v1.40.0 or later
2-3 (E)