4. Access authority in the function for service
When you access the page of the function for service, you are asked to enter the user name and password.
Type as follows.
. User name: service
. Password: (model name in half-width lowercase characters)
Example) vpl-fh65, vpl-f635h, etc.
n
When moving from the service mode to other page and entering the service mode again, close the Web
browser once, and then start the browser again.
1-10-3. Update Function
1. Outline
In this unit, the firmware update can be performed by uploading the file via the Web browser.
n
. The network update can be performed only when this unit is in the stand by state.
When using IE, the following setting is required.
- Select the internet option. → Security tab → Select the network zone.
- Click the custom level.
- Scroll down to "Include the path of local directory when uploading the file to the server".
- Set to "Disable".
. During the update, do not turn on the power of this unit using the various protocols such as remote
control, key of main unit, RS-232C and network.
. "Manual" is recommended for the IP setting.
- It is not recommended to use "Manual" under the DHCP environment in which the IP address may be
changed.
VPL-FH60
1-47 (E)