Cleaning/Maintenance - Leupold GX-6c Operating Instructions Manual

TO TURN OFF THE AUDIBLE BEEP:
1) Press POWER to activate the rangefinder .
2) Press and hold MODE for at least 2 seconds and then release
to enter the Quick Set Menu .
3) Press and release MODE until "bEEP" is displayed .
4) While the word "bEEP" is displayed press and release POWER
as necessary until the word "OFF" is displayed . Press MODE
to save the changes .
NOTE: Prism Lock only works in Scan Mode while pressing and
holding the POWER button.
IMAGE STABILIZATION TECHNOLOGY
Your GX-6c is equipped with Leupold's advanced Image
Stabilization technology . Image Stabilization is always activated
and continuously works to reduce motion caused by shaky
hands . The technology stabilizes both the image and the laser so
your GX-6c rangefinder can deliver accurate ranges regardless of
user movement .

CLEANING/MAINTENANCE

Blow away dust or debris on lenses, or use a soft lens brush
(such as the one found on the Leupold LensPen) . To remove
26