Leupold GX-6c Operating Instructions Manual page 13

release the POWER button to toggle between high, medium, and
low . Press MODE to save the selection .
FOG MODE
The Fog Mode can be used in foggy/rainy
conditions to screen out false readings from
raindrops or other atmospheric interference to
provide an accurate range . Fog Mode changes
the algorithm to look for the "last" target . To
increase ranging accuracy always range the
ground around the pin/flag when Fog Mode is on .
TO ACTIVATE FOG MODE:
1) Press POWER to activate the rangefinder .
2) Press and hold MODE for at least 2 seconds and then release
to enter the Quick Set Menu; the word "Fog" will now appear
in the upper display .
3) While the word "Fog" is displayed, press and release POWER
as necessary until the word "On" is displayed in the lower
portion of the display .
4) To save the changes and return to ranging mode, let the unit
sit idle for at least 30 seconds until an automatic power-down
occurs, or simply press and hold MODE for at least 2 seconds .
To continue through the Quick Set Menu and manipulate
10