Leupold GX-6c Operating Instructions Manual page 12

selections . If additional set up is required, simply Press MODE
to continue through the Quick Set Menu . Pressing and holding
MODE for at least 2 seconds at any time will exit the Quick Set
Menu, save all previous changes, and prepare the rangefinder
for immediate use . To reset your GX-6c to factory settings, press
POWER to activate the unit . With the rangefinder activated,
press and hold MODE, then immediately press and hold POWER .
After the 13-second timer shown in the display reaches zero, the
rangefinder will return to factory settings .
The TGR Indicator (red LED) turns on when the rangefinder is
being used in non-conforming TGR mode . Use of the GX-6c for
tournament play is permitted when Local Rule is in effect (see
USGA Decision 14-3/0 .5), and TGR is turned off . To conform to
USGA rule, ensure the TGR Indicator is turned off .
DISPLAY INTENSITY
This mode is used to adjust the brightness of the
display, allowing you to match the intensity to
current conditions . Your GX-6c has three display
intensity settings; low, medium, and high .
Navigate through the Quick Set Menu by
pressing and releasing the MODE button until
"dISP" is shown in the upper display . Press and
9