Cleaning/Maintenance - Leupold RX-1000i Operation Manual

29

Cleaning/Maintenance

Blow away dust or debris on lenses, or use a soft lens brush (such as the one
found on the Leupold LensPen) . To remove fingerprints, water spots or tougher
dirt, use a soft cotton cloth or the cleaning end of the Leupold LensPen . A lens
tissue with lens cleaning fluid may be used for more stubborn dirt . Always
apply cleaning fluid to the cleaning cloth, never directly to the lens .
To insert a new battery, remove battery cover and
(shown in diagram on page 4)
remove exhausted battery . Insert new CR-2 battery, negative terminal
first, into the battery compartment . Close battery cover .
To focus the digital laser rangefinder, turn the eyepiece left or right
(you will feel and hear the clicking of the diopter, indicating a change
to the focus has been made) until crisp display focus is achieved .
RX-1000i and RX-1000i TBR models are weatherproof .
All models include a lanyard and are equipped with a lanyard attachment
for added security in the field . All models are also supplied with a small
instructional supplement in the inside pocket of the included case .